Exn3000; Exn3500 - IBM N Series Hardware Manual

EXN3000

Physical Specifications EXN3000 SAS/SATA expansion unit
Width: 448.7 mm (17.7 in)
Depth: 653.5 mm (25.7 in)
Height: 174.9 mm (6.9 in)
Weight (minimum configuration): 24 kg (52.8 lb)
Weight (maximum configuration): 44.6 kg (98.3 lb)
Operating Environment
Temperature:
– Maximum range: 10 - 40 degrees C (50 - 104 degrees F)
– Recommended: 20 - 25 degrees C (68 - 77 degrees F)
– Non-operating: -40 - 70 degrees C (-40 - 158 degrees F)
Relative Humidity:
– Maximum operating range: 20% - 80% (non-condensing)
– Recommended operating range: 40% - 55%
– Non-operating range: 10% - 95% (non-condensing)
Maximum wet bulb: 28 degrees C
Maximum altitude: 3045 m (10,000 ft.)
Warning: Operating at extremes of environment can increase failure probability.
Wet bulb (caloric value):
– 2,201 Btu/hr (fully loaded shelf, SAS drives)
– 1,542 Btu/hr (fully loaded shelf, SATA drives)
Maximum electrical power: 100 - 240VAC, 16-6 A (8-3A max per inlet)
Nominal electrical power:
– 100 - 120VAC, 6 A; 200 - 240VAC, 3 A, 50/60 Hz (SAS drives)
– 100 - 120VAC, 4.4 A; 200 - 240VAC, 2.1 A, 50/60 Hz (SATA drives)
Noise level:
– 5.7 bels @ 1 m @ 23 degrees C (SATA drives) idle
– 6.0 bels @ 1 m @ 23 degrees C (SAS drives) idle
– 6.7 bels @ 1 m @ 23 degrees C (SATA drives) operating
– 7.0 bels @ 1 m @ 23 degrees C (SAS drives) operating

EXN3500

Physical Specifications EXN3500 SAS expansion unit
Width: 447.2 mm (17.6 in)
Depth: 542.6 mm (21.4 in)
Height: 85.3 mm (3.4 in)
322
IBM System Storage N series Hardware Guide