c. In the WinZip dialog box, enter the letter of the drive to which you mapped the storage
system. For example, if you chose drive Y, replace DRIVE:\ETC with the following path:
Y:\ETC
See Figure A-6.
Figure A-6 Extract path
d. Ensure that the following check boxes are selected:
• Overwrite files without prompting
• When done unzipping open
Leave the options as they are.
e. Click Unzip. A window displays the confirmation messages as files are extracted
(Figure A-7).
Figure A-7 Extraction finished
f. Run the script installer (Figure A-8).
Figure A-8 Script installer
Appendix A. Getting started
307