Table of Contents
Advertisement
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual
4.2.
Client Side Connection Descriptors
Section Title
Connections
Column Title
Port
Protocol
Baud*
Parity*
Data_Bits*
Stop_Bits*
Handshaking*
Example
//
Client Side Connections
Connections
Port,
Protocol,
R1,
InfraTox,
4.3.
Client Side Node Descriptors
Section Title
Nodes
Column Title
Node_Name
Node_ID
Protocol
Port
1
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction
manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Function
Specify which port the device is
connected to the FieldServer
Specify protocol used
Specify baud rate
Specify parity
Specify data bits
Specify stop bits
Specify hardware handshaking
Baud,
19200,
Function
Provide name for node
Irrelevant for this driver as long
as only one Node is connected.
Otherwise the Node-ID should be
the number of points/sensors for
which
the
Zellweger
configured. A unique Node_ID is
recommended for each Zellweger
Unit as it may be useful in
exposing Node status information
Specify protocol used
Specify at which port the device is
connected to the FieldServer
Ports P1-P8 can be with 232/485
converter.
P1-P8 (with 232/485 converter), R1-
1
R2
InfraTox or Infra-Tox
19200 (Vendor limitation)
None (Vendor limitation)
8 (Vendor limitation)
1
None (Vendor limitation)
Parity,
Stop_Bits
None,
1
Up to 32 alphanumeric characters
unit
is
0-255
InfraTox, Infra-Tox.
P1-P8 (with 232/485 converter),
1
R1-R2
Page 7 of 19
Legal Values
Legal Values
Advertisement
Table of Contents
