Summary of Contents for FieldServer Honeywell Zellweger IR-148 FS-8700-102
Page 1
Driver Manual (Supplement to the FieldServer Instruction Manual) FS-8700-102 Honeywell Zellweger IR-148 APPLICABILITY & EFFECTIVITY Effective for all systems manufactured after September 2009 A Sierra Monitor Company Driver Version: 1.02 Document Revision:...
As a Server: The server side if this driver has been developed primarily to test the Client side driver as part of FieldServer’s QA program. The driver sends messages reporting the state of the samples. The server driver can also be locked to report the status/value of one particular sample channel.
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Hardware Connections The FieldServer is connected to the Honeywell Zellweger IR-148 Device as shown in connection drawing. Configure the device according to manufacturer’s instructions FS-X40 FS-X30 INFRATOX UNIT INFRATOX UNIT CONNECTION NOTES Other devices must not transmit Honeywell Zellweger IR-148 49 byte messages ...
Honeywell Zellweger IR-148 Server having one or eight sensors. The configuration file tells the FieldServer about its interfaces, and the routing of data required. In order to enable the FieldServer for Honeywell Zellweger IR-148 communications, the driver independent FieldServer buffers need to be declared in the “Data Arrays”...
Appendix A.1 Ports P1-P8 require a 232/485 converter. FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com Port Legal Values Up to 32 alphanumeric characters One of the Data Array names from “Data...
FieldServer for Honeywell Zellweger IR-148 communications, the driver independent FieldServer buffers need to be declared in the “Data Arrays” section, the FieldServer virtual Node(s) needs to be declared in the “Server Side Nodes” section, and the data to be provided to the Clients needs to be mapped in the “Server Side Map Descriptors”...
// FILE_IN_HEX_FORMAT FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com Legal Values Up to 32 alphanumeric characters One of the Data Array names specified in Section 4.
6.3.3 Map Descriptor Example 1 Server using Data Array: The following Map Descriptor enables this Driver to send data for all 8 sensors to the Node (DEV1) connected at the FieldServer. Refer to Section 4 for the Data Array format.
SMD1.ini file. FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com Page 13 of 17 line from the SMD1.ini to the Node DEV1 irrespective of the contents. The line may contain up to...
I/O State FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com Description Set non-zero if alarm or a trouble has been reported. Set to zero if neither are currently being reported.
<%d> ignored. Edit CSV file, download the modified file and reset the FieldServer to have the changes take effect. FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com Notes Message reports a gas value and units.
Appendix B.3. Driver stats In addition to the standard FieldServer operating statistics the driver can expose certain key stats in a Data Array which can then be monitored by an upstream device. Adding the following to the configuration file will activate these stats for a driver configured as a Client.
Need help?
Do you have a question about the Honeywell Zellweger IR-148 FS-8700-102 and is the answer not in the manual?
Questions and answers