Table of Contents
Advertisement
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual
5.2.
Server Side Node Descriptors
Section Title
Nodes
Column Title
Node_Name
Node_ID
Protocol
Port
Example
//
Server Side Nodes
Nodes
Node_Name,
DEVR1,
5.3.
Server Side Map Descriptors
5.3.1.
Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Offset
Function
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Function
Provide name for node
Commonly used parameter but
irrelevant for this driver as
Protocol is node-less.
A unique Node_ID is, however,
recommended
Honeywell
Zellweger
Unit as it may be useful in
exposing
information
Specify protocol used
Specify at which port the device
is connected to the FieldServer
Ports P1-P8 can be used with
232/485 converter.
Node_ID,
1,
FieldServer Specific Map Descriptor Parameters
Function
Name
of
Descriptor
Name of Data Array where
data is to be stored in the
FieldServer
Starting location in Data
Array
Function of Server Map
Descriptor
Up
characters
for
each
1-255
IR-148
Node
status
InfraTox, Infra-Tox.
P1-P8
converter), R1-R2
Protocol,
InfraTox,
this
Map
Up
characters
One of the Data Array
names from "Data Array"
section above
0 to maximum specified in
"Data Array" section above
Wrbc
Page 11 of 19
Legal Values
to
32
alphanumeric
(with
232/485
Port
R1
Legal Values
to
32
alphanumeric
Advertisement
Table of Contents
