Table of Contents
Advertisement
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual
5.3.2.
Column Title
Node_Name
Length
Da_Byte_Array_Name*
Data_Byte_Offset*
Infra_Func
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Driver Specific Map Descriptor Parameters
Function
Name of Node to which data
has to be sent.
Length of Map Descriptor
Name of Data Array used to
lock the sensor.
report data for the locked
sensor only.
Specifies
Da_Byte_Array_Name
Data array.
location will be checked every
time if the user has locked a
sensor.
If
this
parameter
specified, the driver will use the
Data_Array_Offset value.
For
quality
parameter is used to send a
message to a Client from a
Map_Descriptor_Name*.ini file.
With the use of this function
Data_Array_Offset value will be
used as line number from INI to
send.
INFRA_SIMULATION:
numbered line will be sent to
Client by the Map Descriptor.
INFRA_SIMULATION_ALL:
Starting at the numbered line all
lines will be sent one by one to
the Client until the end of the
file is reached.
INFRA_SIM_ALL_REPEAT:
Repeatedly
numbered line to end of the file
all lines will be sent to Client
one by one by this single Map
Descriptor.
Note: Ini must show all bytes as
two
character
representation and first line of
should be
// FILE_IN_HEX_FORMAT
One of the node names
specified in "Server Node
Descriptor" - section 5.2
1-Maximum of Data Array
length.
One of the Data Array
Driver will
names from "Data Array"
section above
offset
for
This memory
1-Maximum of Data Array
length.
is
not
assurance
this
only
INFRA_SIMULATION
INFRA_SIMULATION_ALL
INFRA_SIM_ALL_REPEAT
Starting
from
hex
Page 12 of 19
Legal Values
Advertisement
Table of Contents
