Related Manuals for FieldServer FS-8700-39 EST3 ECP
Summary of Contents for FieldServer FS-8700-39 EST3 ECP
- Page 1 Driver Manual (Supplement to the FieldServer Instruction Manual) FS-8700-39 EST3 ECP APPLICABILITY & EFFECTIVITY Effective for all systems manufactured after September 2008 Driver Version: 1.08 Document Revision:...
-
Page 2: Table Of Contents
Appendix D. EST3 ECP Connection Statistics:................20 Appendix E. Driver Error Messages ....................21 FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com... -
Page 3: Est3 Description
ECP Type II with Text Not Supported ECP Type III Supported ECP Type III with Text Not Supported FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com... -
Page 4: Hardware Connections
8917-03 8917-03 FS-8915-10 Connect to one of the RS-232 Ports on the FieldServer FieldServer FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com... -
Page 5: Configuring The Fieldserver As A Est3 Client
4.1. Data Arrays The configuration file tells the FieldServer about its interfaces, and the routing of data required. In order to enable the FieldServer for EST3 communications, the driver independent FieldServer buffers need to be declared in the “Data Arrays” section, the destination device addresses need to be declared in the “Client Side Nodes”... -
Page 6: Client Side Connection Descriptors
Edwards Recommends 19200-baud minimum in order to prevent buffer overruns in the EST3 panel FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com... -
Page 7: Client Side Map Descriptors
-32767 to 32767, 100 WRBC is not recommended, as startup values may be invalid FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com... - Page 8 -, Point I/O Status, Sensitivity, EST_Report_Type Report Date Time Refer to Appendix A.4 and Section 4.4.4 FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com...
-
Page 10: Appendix A. Driver Notes
Delta messages will therefore only have an effect when optional Data Arrays have been configured. See 0 for detail. FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com... -
Page 12: Appendix A.5. Optional Data Arrays
The EST3 panel is only able to send/accept Acknowledgement when the panel is in Proprietary Mode. Contact EST (Edwards Systems Technology) for information on configuring the panel. FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com... -
Page 14: Appendix A.6. Object Types And Required Parameters
ChkInGrp EST_Index AmpPower EST_Panel, EST_Card Partition EST_Panel, EST_Card, Address Instruction Text EST_Panel, EST_Card, Address FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com... -
Page 15: Appendix A.5.5. Est_Report_Type
,EST_Object_Type ,Length MD_Set_Date ,DA_Set_Date ,Wrbx ,EST_1 ,SetDate MD_Set_Time ,DA_Set_Time ,Wrbx ,EST_1 ,SetTime The following Map Descriptor will enable the FieldServer to synchronize its clock with the EST panel clock Map_Descriptors Map_Descriptor_Name ,Data_Array_Name ,Data_Array_Offset ,Function ,Node_Name ,EST_Report_Type ,Length MD_SLV_TIME ,DA_TIME ,Passive... -
Page 16: Appendix B. Troubleshooting Tips
To solve multiple com errors, try adding an IC_Timeout parameter to the Client Side connections and set it to 0.5s. FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com... -
Page 17: Appendix C. Est3 Data Format
DeviceComm GroundFault InternalTrouble BadType BadPersonality UnexpectedDevice CommonTrouble RelayConfirmation Monitor LocalMonitor Damper Door Switch FirePhone FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com... - Page 18 SecurityEntryTimer SecurityBypassed SecurityStay SecurityAway SecurityStayFail SecurityAwayFail SecurityClosingTrouble SecurityNoClose SecurityPartitionUpdate Complete Spare AccessACFail AccessLowBattery AccessStrikeFault FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com...
-
Page 19: Appendix C.2. Output Data Format
For LED’s, the attribute values are: Attribute (LED) Encode Value 101h Slow Flash 201h Fast Flash 301h Disable Enable FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com... -
Page 20: Appendix D. Est3 Ecp Connection Statistics
FieldServer as SCADA bytes transmitted and received. The FieldServer acts as a client by inserting requests into its response messages; the EST panel • then inserts the requested data into its subsequent polling messages. The bytes transferred in this process are displayed on the FieldServer as PLC bytes transmitted and received. -
Page 21: Appendix E. Driver Error Messages
Download the configuration file, make the necessary changes, upload to the FieldServer and cycle power to the FieldServer for the changes to take effect. FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com...
Need help?
Do you have a question about the FS-8700-39 EST3 ECP and is the answer not in the manual?
Questions and answers