Summary of Contents for FieldServer FS-8700-12 AB DH+
Page 1
A Sierra Monitor Company Driver Manual (Supplement to the FieldServer Instruction Manual) FS-8700-12 AB DH+ APPLICABILITY & EFFECTIVITY Effective for all systems manufactured after May 1, 2001...
Page 3 of 14 Allen Bradley DH+ Description The DH+ driver allows the FieldServer to transfer data to and from devices using DH+ protocol. The Communications Adapter card is included with the FieldServer. The FieldServer can emulate either a Server or Client.
DH+ Client, e.g. RSView, Wonderware, Intellution FIX, GE Cimplicity, etc. If FieldServer used as Allen Bradley DH+ Client If FieldServer used as Allen Bradley DH+ Server FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com...
Page 5 of 14 Hardware Connections Configure the PLC according to manufacturer’s instructions and configure checksum to use BCC checksum, not CRC. FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com...
For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer (See “.csv” sample files provided with the FS).
Scaling zero in Connected -32767 to 32767, default Node_Low_Scale* Node Scaling max in Connected -32767 to 32767, default Node_High_Scale* Node FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com...
Scaling zero in Connected Node_Low_Scale* -32767 to 32767, 0 Node Scaling max in Connected Node_High_Scale* -32767 to 32767, 100 Node FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com...
BCC (Block Check Sum) is supported, whereas CRC (Cyclic Redundancy Check) is not. 6.3. DH+ as FieldServer Server If the FieldServer is to be polled by the DH+ network, then it is important to declare the station address in the “FieldServer” portion of the configuration file. e.g. FieldServer Title, System_Station_Address DCC099 Primserv.csv v3.00u,...
FS-8700-12_DH+ Manual Page 14 of 14 Revision History Driver Document Date Resp Comment Version Revision 11/28/03 Updated formatting 2/18/04 Releasing...