Client Side Connection Descriptions; Client Side Node Descriptors - FieldServer FS-8700-127 Hanning Driver Manual

FS-8700-127 Hanning & Kahl HCS-R Manual
4.2.

Client Side Connection Descriptions

Section Title
Connections
Column Title
Port
Protocol
Baud*
Parity*
Data_Bits*
Stop_Bits*
Handshaking*
Poll_Delay*
Example
// Client Side Connections
Connections
Port, Protocol,
P8, HCS-R,
4.3.

Client Side Node Descriptors

Section Title
Nodes
Column Title
Node_Name
Node_ID
Protocol
Connection
Example
// Client Side Nodes
Nodes
Node_Name,
PLC 1,
1
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction
manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com
Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@FieldServer.com
Function
Specify which port the device is
connected to the FieldServer
Specify protocol used
Specify baud rate
Specify parity
Specify data bits
Specify stop bits
Specify hardware handshaking
Time between internal polls
Baud,
9600,
Function
Provide name for Node
HCS-R station address of physical
server Node
Specify protocol used
Specify which port the device is
connected to the FieldServer
Node_ID,
240,
1
P1-P8
HCS-R
HCSR
H&K HCS-R
9600 (Vendor limitation)
None (Vendor limitation)
8 (Vendor limitation)
1 (Vendor limitation)
None (Vendor limitation)
0-32000 seconds, 0.05 seconds
Parity, Handshaking,
None, None,
Up to 32 alphanumeric characters
240 (Protocol limit)
HCS-R
HCSR
H&K HCS-R
1
P1-P8
Protocol,
HCS-R,
Page 7 of 17
Legal Values
Poll_Delay
0.100s
Legal Values
Connection
P8