Configuring The Fieldserver As A Hcs-R Client; Data Arrays/Descriptors - FieldServer FS-8700-127 Hanning Driver Manual

Fs-8700-127 hanning; kahl hcs-r
Hide thumbs Also See for FS-8700-127 Hanning:
Table of Contents

Advertisement

FS-8700-127 Hanning & Kahl HCS-R Manual
4.

Configuring the FieldServer as a HCS-R Client

For a detailed discussion on FieldServer configuration, please refer to the FieldServer
Configuration Manual. The information that follows describes how to expand upon the factory
defaults provided in the configuration files included with the FieldServer (See ".csv" sample files
provided with the FieldServer).
This section documents and describes the parameters necessary for configuring the FieldServer
to communicate with a HCS-R Server.
4.1.

Data Arrays/Descriptors

The configuration file tells the FieldServer about its interfaces, and the routing of data
required.
In order to enable the FieldServer for HCS-R communications, the driver
independent FieldServer buffers need to be declared in the "Data Arrays" section, the
destination device addresses need to be declared in the "Client Side Nodes" section, and
the data required from the servers needs to be mapped in the "Client Side Map Descriptors"
section. Details on how to do this can be found below.
Note that in the tables, * indicates an optional parameter, with the bold legal value being the
default.
Section Title
Data_Arrays
Column Title
Data_Array_Name
Data_Array_Format
Data_Array_Length
Example
//
Data Arrays
Data_Arrays
Data_Array_Name,
DA_CURRENT,
DI_FromLoop01,
DI_OnLoop01,
DI_FromLoop02,
DI_OnLoop02,
DI_FromLoop03,
DI_OnLoop03,
DI_FromLoop014
DI_OnLoop04,
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com
Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@FieldServer.com
Function
Provide name for Data Array
Provide data format. Each Data Array can
only take on one format.
Number of Data Objects. Must be larger
than the data storage area required by the
Map Descriptors for the data being placed
in this array.
Data_Array_Format,
Uint16,
Bit,
Bit,
Bit,
Bit,
Bit,
Bit,
Bit,
Bit,
Page 6 of 17
Legal Values
Up
to
15
alphanumeric
characters
Float, Bit, UInt16, SInt16,
Byte,
1-10,000
Data_Array_Length
22
22
22
22
22
22
22
22
22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FS-8700-127 Hanning and is the answer not in the manual?

This manual is also suitable for:

Kahl hcs-r

Table of Contents