FS-8700-127 Hanning & Kahl HCS-R Manual
3.
Hardware Connections
The FieldServer is connected to the Hanning & Kahl HCS-R as shown in connection drawing.
Configure the HCS-R according to manufacturer's instructions
HCS-R
(Hanning Communication System)
3.1.
Hardware Connection Tips / Hints
1. Loop back RTS CTS if it is required by the other
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com
Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@FieldServer.com
RS-232
FS-8917-02
RJ45 CAT 5 Cable
8917-02 WIRE LIST
FUNCTION
FROM
Rx
RJ45-01
GND
RJ45-04
Tx
RJ45-08
RTS
CTS
FIELDSERVER
HANNING KAHL
CONNECTION DIAGRAM
BASE NAME:
FS-8700-127
FILE NAME:
device.
Page 5 of 17
TO
DB9F-03
DB9F-05
DB9F-02
DB9F-07
DB9F-08
(408)-262-2299
DATE: 2/12/08
BY:
MC
Need help?
Do you have a question about the FS-8700-127 Hanning and is the answer not in the manual?