Wireless (Wifi) - Cradlepoint MBR1000 User Manual

CradlePoint MBR1000 | USER MANUAL _ Firmware Version 1.3.1
STATUS
7.2 WireLeSS (Wi-fi).
The Wireless (Wi-Fi) sub-menu displays the number of wireless clients that
are connected to the router, the MAC address of each system connecting
wirelessly, and the IP address of each system connecting wirelessly.
Control buttons allow the administrator to allow or deny access for each of
the listed computers. If has not been enabled (
Require User Login Basic >
sub-menu), then the control buttons are not available on this sub-
Wizard
menu.
7.2.1 number of WireLeSS cLientS.
This lists the client computers that are currently connected to the WLAN ac-
cess point.
MAC Address. The Ethernet ID (MAC address) of the wireless client.
IP Address. The LAN-side IP address of the client.
Mode. The transmission standard being used by the client. Values are ,
11a
, , or for 802.11a, 802.11b, 802.11g, or 802.11n respectively.
11b 11g 11n
Rate. The actual transmission rate of the client in megabits per second.
Signal. This is a relative measure of signal quality. The value is expressed as
a percentage of theoretical best quality. Signal quality can be reduced by dis-
tance, by interference from other radio-frequency sources (such as cordless
telephones or neighboring wireless networks), and by obstacles between the
router and the wireless device.
Wireless (Wi-Fi) screen
If is enabled then you can also control internet access
Require User Login
privileges for the attached wireless clients.
(continued)
Table of Contents
PAGE