CradlePoint MBR1000 | USER MANUAL _ Firmware Version 1.3.1
ADVANCED
The first rule is to configure a
arrives on these ports but does not match data from the sources you want
to have access to your network. It is important to enter the
since all subsequent rules will be added higher in the list and will be checked
first.
Notice that it covers all
Source IP Address
, but is specifically tied to the Public Ports defined in the
Times (Always)
fic for other applications. It is a good idea to turn on the log for this rule so that you can check in the log for anything that is filtered inappropriately.
rule that will catch all of the traffic that
DENY
DENY
,
, and
Source Ports
rule first
. This is because you do not want to accidentally block traf-