Cradlepoint MBR1200 Quick Start Manual
Failsafe gigabit n router for mobile broadband
Hide thumbs
Also See for MBR1200:
- Product manual (132 pages) ,
- User manual (66 pages) ,
- Quick start manual (2 pages)
Related Manuals for Cradlepoint MBR1200
Summary of Contents for Cradlepoint MBR1200
- Page 2 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
-
Page 3: Industry Canada Statement
IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Following three 3.5G card have passed co-located EMC/RF exposure test with this device and could be used with this device. -
Page 4: Important Note
conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device This device has been designed to operate with an antenna having a maximum gain of 4.98dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. - Page 5 MOUNTING PROCEDURE There are three ways for mounting the CEP: Wall mounting 1. Locate a high position on the wall that is free of obstructions. 2. Connect two screws in the wall 5cm (2 in.) apart. Do not screw the screws all the way into the wall. Important! Make sure that the screws are securely fixed to the wall and strong enough to hold the weight of the CPE.