Wifi / Local Networks - Cradlepoint IBR60 User Manual

IBR600| USER MANUAL Firmware ver. 3.3.0
CRADLEPOINT

6.7 WiFi / Local Networks

This section is used to configure the
settings for wireless networks created by
your router. Note that changes made in this
section may also need to be duplicated on
wireless devices that you want to connect
to your wireless network.
For example, if you change a LAN's IP address,
devices within that network will lose connection.
They will have to reconnect to the network.
The user can set up multiple networks on
the IBR600, each with its own unique
configuration and its own selection of
interfaces. Each local network can be
attached to any of the following types of
interfaces:
 WiFi
 Ethernet
 VLAN
For example, one network might be just an
isolated WiFi hotspot for guests, while
another might be the main network with
administrative access, an Ethernet port, a
password-protected WiFi SSID, and a
VLAN interface.
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 59