Cradlepoint MBR1000 User Manual page 32

CradlePoint MBR1000 | USER MANUAL _ Firmware Version 1.3.1
ADVANCED
5.1.2 virtuaL Server LiSt.
Entries on this list can be enabled or disabled by toggling the
box. Entries can be modified by clicking on the paper and pencil icon. To
delete an entry, click on the trash can icon.
After you've completed all modifications or deletions, you must click the
button at the top of the page to save your changes. The router must reboot before new settings will take effect. You will be prompted to
Save Settings
or
Reboot the Device Continue
click the button.
Reboot the Device
Example:
You are hosting a Web Server on a Laptop or PC that has Private IP Address of 192.168.0.50 and your ISP is blocking Port 80.
1. Name the Virtual Server Rule (e.g.,
2. Enter in the IP Address of the machine on your LAN –
3. Enter the Private Port as
[80]
4. Enter the Public Port as
[8888]
5. Select the Protocol -
TCP
6. Ensure the schedule is set to
7. Check the check box to add the settings
Add Rule
8. R epeat these steps for each
With this Virtual Server Rule all Internet traffic on Port 8888 will be redirected to an internal web server on port 80 at IP Address 192.168.0.50.
. If you need to make additional settings changes, click
)
Web Server
192.168.0.50
Always
you wish to add. After the list is complete, click
Virtual Server Rule
check
Enable
Continue
PAGE 3
Virtual Server List
. If you are finished with all configuration settings,
at the top of the page.
Save Settings
Table of Contents