Cradlepoint MBR1000 User Manual page 9

CradlePoint MBR1000 | USER MANUAL _ Firmware Version 1.3.1
7. Setting Up Wireless Network Security (continued).
the menu tab at the top of the setup window. Next, click the
BASIC
button in the middle of the screen.
Wizard
Follow the instructions in the Setup Wizard to complete the setup (
A fter security setup has been completed, continue to Step 8 to use your new Security-
Enabled Internet Connection.
8. Internet Access. When you are ready to access the Internet using your MBR1000
router, you will again be prompted for your password. Use the password you assigned
in Step 2. If you did not change the password, or have not yet setup your wireless
network security, use the default password. The default password is the last six digits
of the MBR1000's MAC address. The MAC address can be found on the MBR1000
product box or the bottom of the MBR1000.
Enter the password and click the
A fter login, you will be able to click on a
next time user device connects to the MBR1000, no password is needed.
R emember: This password is necessary to protect against unauthorized access to
your system.
After you are logged in, click on
button.
Login
button so that so that the
Remember Me
Launch Setup
).
Basic > Wizard
PAGE 
Setup Wizard screen
Internet Access screen
Table of Contents