Configuring User Accounts - D-Link DGS-3100 SERIES User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

Configuring User Accounts

User accounts including user passwords and access rights are defined on the User Accounts Page. To define user account
information:
1. Click Configuration > User Accounts. The User Accounts Page opens:
The User Accounts Page contains the following fields:
Field
User Name
New Password
Access Right
37
Figure 0-8 User Accounts Page
Description
Defines the user name. The user name can contain up-to 15 characters.
Defines the password assigned to the user account. The password can contain up-to 15
characters.
Displays the user access level. The possible field values are:
Admin — Assigns the user full administrative access through both the Web Interface and
the CLI.
Operator — Assigns the user operator-level access, which is similar to Admin access
except that the operator cannot update the firmware, startup configuration, user accounts,
or restore factory reset.
User — Assigns the user read-only access through both the Web Interface and the CLI.
The Following limitations appear on the Web Interface:

The 'Save' navigation tree button does not appear and only 'Show Stack Status'
feature appears under the 'Tools' button in the Web Interface.

An 'Access Denied' window is displayed, if the user clicks Apply. In order to return
to the Web Interface, the user has to go back to the previous page or access a