D-Link DGS-3100 SERIES User Manual page 222

5. To add an ACL profile Click
The Add ACL Profile Page contains the following fields:
Field
L2 ACL
L3 IPv4 ACL
L3 IPv6 ACL
1. Define the L2 ACL or L3 ACL fields.
2. Click
create filtering masks.
Figure 0-3 Add ACL Profile Page
Description
Defines the ACL profile Layer 2 protocols. The possible values are:
Tagged — Defines the profile Layer 2 to match 802.1Q fields in the Layer 2 header.
Untagged — Defines the profile Layer 2 to check the Layer 2 header without the 802.1Q
fields .
Defines the ACL profile Layer 3 protocols. The possible fields are:
ICMP — Specifies ICMP as the Layer 4 protocol that the access profile checks.
IGMP — Specifies IGMP as the Layer 4 protocol that the access profile checks
TCP — Specifies TCP as the Layer 4 protocol that the access profile checks.
UDP — Specifies UDP as the Layer 4 protocol that the access profile checks.
Defines the IPv6 ACL profile Layer 3 IPv6 protocols. The possible fields are:
ICMP — Specifies ICMP as the Layer 3 IPv6 protocol that the access profile checks.
TCP — Specifies TCP as the Layer 3 IPv6 protocol that the access profile checks.
UDP — Specifies UDP as the Layer 3 IPv6 protocol that the access profile checks.
The Add ACL Profile Page updates accordingly, enabling selection of the packet field to
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
. The Add ACL Profile Page opens:
206