Configuring User Accounts - D-Link DGS-3100 User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

Configuring User Accounts

User accounts including user passwords and access rights are defined on the User Accounts Page. To define user account
information:
1. Click Configuration > User Accounts. The User Accounts Page opens:
The User Accounts Page contains the following fields:
Field
User Name
New Password
Access Right
Confirm New Password
2. Define the User Name field.
3. Select the user access level in the Access Right field.
4. Enter a new password in the New Password field and then re-enter it again in the Confirm New Password field.
5. Click
31
Figure 2-8 User Accounts Page
Description
Defines the user name. The user name can contain up-to 15 characters.
Defines the password assigned to the user account. The password can contain up-to 15
characters.
Displays the user access level. The possible field values are:
Admin — Assigns the user full administrative access through both the Web Interface and
the CLI.
Operator — Assigns the user operator-level access, which is similar to Admin access
except that the operator cannot update the firmware, startup configuration, user accounts,
or restore factory reset.
User — Assigns the user read-only access through the CLI only. A User cannot access the
Web Interface.
Confirms the user password.
. The new user accounts, passwords, and access rights are defined and the device is updated.