D-Link DGS-3100 SERIES User Manual page 238

3. Enter a port ID in the box adjacent to the Mask Generate button.
4. Alternatively, click
5. Enter a port ID range into the Generate Mask by range fields, and click
6. Click
To define L3 IPv6TCP Flag ACL Profile:
This option defines whether or not the TCP Flag field is checked for a match.
1. Click the TCP Flag button. The ACL Profile L3 Ipv4 TCP Flag Page updates to show the following:
2. Click
UDP Filtering
If L3 IPv6 ACL UDP is selected, the page updates as follows:
. The ACL profile is added, and the device is updated.
Figure 0-22 ACL Profile L3 IPv6 TCP Flag Page
. The ACL profile is added, and the device is updated.
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
. The Generate Mask by range fields appear.
. The mask is generated.
222