D-Link DGS-3100 SERIES User Manual page 260

ID SEVERITY
SYSLG8.97.18 Error
Information
SYSLG1.0.55 al
Information
SYSLG1.0.56 al
Information
SYSLG1.0.59 al
Information
SYSLG1.2.4 al
Information
SYSLG1.3.0 al
Information
SYSLG1.3.1 al
Information
al
SYSLG1.3.2
Information
SYSLG1.5.23 al
Information
SYSLG1.5.24
al
Information
SYSLG1.5.25 al
Information
SYSLG1.5.26 al
Information
SYSLG1.5.28 al
Information
SYSLG1.5.29 al
Information
SYSLG1.5.30 al
Information
SYSLG1.6.11 al
Information
SYSLG1.6.8 al
Information
SYSLG4.10.13 al
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
CATEGORY MESSAGE
Memory for notifying
applicaton %(1)s could
System not be allocated.
File %(1)s has been Auto
Up/Download Updated
Auto Update Completed;
Up/Download rebooting the switch
Active image successfully
Up/Download changed to image %(1)d
entity configuration
change trap.
Pse Port %(1)s delivering
Interface power to the PD.@
PSE power usage %(1)d
in unit %(2)d is above the
System threshold.@
PSE power usage %(1)d
in unit %(2)d is below the
System threshold.@
Unit %(1)d was shutdown
- JUMBO frames not
Interface supported.
Master switchover: unit
Stack
%(1)d is now master.
Backup master unit %(1)d
was removed from the
Stack stack.
Unit %(1)d was removed
Stack from the stack.
Ipc connection with unit
IP %(1)d failed.
Configuration changed:
%(1)s
Stack cable %(1)s : link
Stack %(2)s on unit-%(3)d
PS# %(1)d status changed
- %(2)s.
FAN# %(1)d status
System changed - %(2)s.
Add dynamic MAC
%(1)m - Vlan %(2)d
failed, %(3)d mac failed to
be inserted from the last
DESCRIPTION
Memory for notifying the
specified application could
not be allocated.
The specified file has been
Auto Updated.
Auto Update is completed.
The switch is being;
rebooted.
Active image is
successfully changed to the
specified image.
The specified PSE port is
delivering power to the PD.
The PSE power used by the
specified unit is above the
threshold.
The PSE power used by the
specified unit is below the
threshold.
The specified unit is
shutdown because Jumbo
frames are not supported.
The specified unit is now
the Master unit.
The specified backup
master is removed from the
stack.
The specified unit is
removed from the stack.
The IPC connection with
the specified unit has failed.
The specified stacking cable
is connected to the specified
unit.
The system uses two power
supply sources: #1 and #2.
The system can operate
with one or both power
supply units. The power
supply has changed.
The specified fan status has
changed.
244