D-Link DGS-3100 SERIES User Manual page 256

ID SEVERITY
SYSLG8.49.3 Error
SYSLG8.49.30 Error
SYSLG8.49.4 Error
SYSLG8.49.5 Error
SYSLG8.49.6 Error
SYSLG8.5.143 Error
SYSLG8.5.158 Error
SYSLG8.5.160 Error
SYSLG8.5.161 Error
SYSLG8.5.162 Error
SYSLG8.5.180 Error
SYSLG8.5.181 Error
SYSLG8.56.3 Error
SYSLG8.58.4 Error
SYSLG8.6.6 Error
SYSLG8.61.0 Error
SYSLG8.63.11 Error
SYSLG8.63.3 Error
SYSLG8.73.1 Error
SYSLG8.74.57 Error
SYSLG8.74.58 Error
SYSLG8.75.1 Error
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
CATEGORY MESSAGE
Unable to allocate
SSH memory pool for SSH
sshp_text_handler: Unable
to allocate memory for
incoming text from the ssh
connection. Data may
SSH have been lost.
balloc: could not allocate
System %(1)d bytes (%(2)d)
bfree: Cannot free
Port Security memory: block is corrupt
bfree: Freeing more
Port Security memory than was used
SNMP Unknown field %(1)s
System Cannot update Hash
System Cannot clean Hash
Cannot insert entry to
System Hash
Cannot delete entry from
System Hash
GCLIP_mib2cli_analyze_
command: Cannot insert
System entry to Hash
Length is limited by 160
SNMP characters
Failed to set default
Interface priority@
Security Failed to update queue@
VLAN Too Many Vlan.
%(1)s: Errors occurred
during initialization
UNIT ID
Stack %(1)d,Msg:%(2)s
UNIT ID
Stack %(1)d,Trap:%(2)s
Errors occurred during
System
initialization
Packet RX on interface
%(1)s from %(2)s type
SSH %(3)s - %(4)s
Packet RX on virtual
interface %(1)s area %(2)s
SSH type %(3)s - %(4)s
IP
SVNZIP encountered data
DESCRIPTION
Unable to allocate a
memory pool for SSH.
Unable to allocate memory
for incoming text from the
SSH connection. Data may
have been lost.
Could not allocate the
specified bytes.
Cannot free memory: The
memory block is corrupt.
More memory was used,
The specified field is
unknown.
Cannot update the Hash.
Cannot clean the Hash
values.
Cannot insert an entry into
Hash.
Cannot delete an entry from
Hash.
Cannot insert an entry to
Hash.
The field length is limited
by 160 characters.
Failed to set default
priority.
Failed to update queue.
Too many VLANs are
defined.
Errors occurred during
initialization.
Errors occurred during the
initialization process.
Key IDs do not match; keys
are expired or some other
key configuration problems.
Key IDs do not match; keys
are expired or some other
key configuration problems.
SVNZIP encountered the
240