Viewing Transmitted Packet Statistics - D-Link DGS-3100 SERIES User Manual

To clear the Unit and Port fields:
1. Click
2. Define the Time Interval and Record Number fields.
3. Click
4. To view the graph as a table, click

Viewing Transmitted Packet Statistics

The Transmitted(TX) Page contains information about packets transmitted through device ports. To view transmitted packet
statistics:
1. Click Monitoring > Packets >Transmitted(TX). The Transmitted(TX) Page opens:
The Transmitted(TX) Page contains the following fields:
Field
Unit
Port
Bytes
Packets
Time Interval
Record Number
Show/Hide
. The fields are cleared.
. The selected UMB_Cast (RX) packet analysis is displayed
View Table
Figure 6-7 Transmitted(TX) Page
Description
Indicates the stacking member ID for which the transmitted packets parameters are displayed.
Indicates the port for which the transmitted packets parameters are displayed.
Indicates the total number of bytes that were transmitted through the port.
Indicates the total number of packets that were transmitted through the port.
Indicates the time interval for which the transmitted packets are displayed. The possible field
values are: 1s - 5s, 10s, 15s, 20s, 30s, 40s, 50s, and 60s.
Indicates the transmitted record number.
Displays the bytes/packets received information. The possible field values are:
Bytes checked — Displays the total amount of transmitted bytes.
Packets checked — Displays the total amount of transmitted packets.
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
.
178