Defining Lldp Dot3 Tlv Settings - D-Link DGS-3100 SERIES User Manual

Field
2. Define the Unit, From Port, To Port, Port Description, System Name, System Description and System Capabilities
fields.
3. Click

Defining LLDP Dot3 TLV Settings

The LLDP Dot3 TLVS Setting Page displays LLDP Dot3 TLV port information and contains parameters for configuring
LLDP Dot3 TLV port settings.
1. Click L2 Features > LLDP > LLDP Dot3 TLVS Setting. The LLDP Dot3 TLVS Setting Page opens:
The LLDP Dot3 TLVS Setting Page contains the following fields:
Field
Unit
From Port
To Port
MAC/PHY Configuration Status
2. Define the Unit, From Port, To Port and MAC/PHY Configuration Status fields.
3. Click
Description
Enabled — Enables the System Capabilities TLV on the port.
Disabled — Disables the System Capabilities TLV on the port.
. The LLDP basic TLV settings are defined, and the device is updated.
Figure 0–31 LLDP Dot3 TLVS Setting Page
Description
Indicates the stacking member for which the LLDP dot3 TLV port settings are
defined.
Defines the first port in a consecutive sequence of ports.
Defines last port in a consecutive sequence of ports.
Specifies whether the MAC/PHY Configuration Status is enabled on the port.
The possible field values are:
Enabled — Enables the MAC/PHY Configuration Status on the port.
Disabled — Disables the MAC/PHY Configuration Status on the port.
. The LLDP Dot3 TLV settings are defined, and the device is updated.
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
114