Backup - LG LE5008 Series Owner's Manual

30 Installation

Backup

3
• Partition Selection: Select a backup partition.
• Schedule: You can set the backup schedule.
- OFF: All options are disabled.
- WEEKLY or DAILY: The backup data will be automatically
saved according to the setting.
- INSTANT: The backup data is saved manually.
• Device: Select a backup device.
• Schedule Start: Set the schedule start date (A day of the week
and time).
• Time Range Date: Enter the backup time range. Enter the date
you want to backup.
• Time Range Start: Enter the start day of the week or time.
• Time Range End: Enter the end day of the week or time.
• Estimate Size: Displays the size of backup data and the free
space of external devices.
• Start Backup: To start backup.
• Erase Media: To erase the media.
Instant Backup
1. Connect the backup USB device or insert a recordable disk to
the disc driver for backup.
2. Select the partition you want to backup.
3. Select INSTANT from the schedule options.
4. Select the backup device.
5. Select the Time Range Date, Time Range Start time, and Time
Range End time for backup.
6. Select the [Estimate Size] icon and press ENTER.
7. Check the size of the selected data and free space. If the device
does not have enough space, create space on the device or
erase the previously stored data.
8. Select the [Start Backup] icon and press ENTER to start backup.
9. Exit the setup menu. You can check the backup status on the
system control bar in backup progress.
Daily/Weekly backup
1. Connect the USB device for backup. You cannot use the CD or
DVD writer for daily or weekly backup.
2. Select WEEKLY or DAILY on the schedule options.
3. Select the backup device.
4. Enter the date and/or time to start backup on the schedule start
option.
5. Enter the day of week and/or time on the Time Range Start
option.
6. Enter the day of week and/or time on the Time Range End
option.
7. Select the [Estimation Size] icon and press ENTER.
8. Check the size of selected data and free space of USB device. If
the USB device does not have enough space, change the USB
device to a USB which has enough space or erase data of the
connected USB device.
NOTE
• The backup function is not supported on the external USB CD-
ROM driver.
• Available external device for backup.
Device
USB HDD Less than 1 TB.
E-SATA HDD Unlimited.
• Use the recommended external USB devices for preventing
malfunction (See page 69).
• The CD-R, DVD-R or DVD+R discs cannot be formatted.
• DVD+RW and DVD-RW discs have to be initialized before
using.
• An external media has to be formatted on this unit to prevent
malfunction.
• You cannot use the [Estimate size], [Start Backup] and [Erase
Media] options in backup progressing.
• Do not remove the external device while the backup is in
progress, it may cause a malfunction.
• If you format the external media by using a PC with FAT32, the
media may not be used on this unit.
• Check the size of the selected data and free space of the
external device. If the device does not have enough space,
create space on the device or erase the previously stored data.
1. Select the [Estimate Size] icon and press ENTER.
The size of the selected data and free space is displayed.
2. Select [OK] and press ENTER to close the window.
• You cannot stop the backup in backup progress.
• The warning message will appear for the conditions listed
below.
- When the start time and end time are the same value.
- When the start time is later than the end time.
-
When you set the time for data that does not exist.
- When the start time and end time setting are wrong.
- A media does not have enough space.
- When the selected USB device is disconnected.
Capacity