Operation; Instant Recording - LG LE5008 Series Owner's Manual

4

Operation

Instant Recording

Images from a camera will be recorded on the built-in hard disk.
Ensure all the cameras are connected and that time and date have
been set correctly.
Before you start recording, first check the repeat recording settings
in the recording menu of the system setup, and then make the
recording settings.
1. Press the REC button and then press the channel button you
want to record. The recording type indicator turns green on the
selected channel screen of the main monitor.
2. Press the REC button and then press the channel button you
want to stop recording. If you stop instant recording, the
recording mode will be changed into the scheduled recording
mode (Continuous/ Alarm/ Motion records). If the schedule is
not set, the button indicator turns off and the recording type
indicator turns white on the selected channel screen of the
main monitor.
Panic Recording
You can record the all channels at the same time.
This function is activated for a live channel only.
1. Press and hold the REC button until the Recording Type
indicator turns green on the all live channel screens.
The DVR will start recording.
2. Press and hold the REC button until the Recording Type
indicator turns white on the all live channel screens. The DVR
will stop recording.
NOTE
• External recording devices can be used as copy areas for
images recorded on the hard disk. It is impossible to record
images on the external recording devices directly.
• You can record instantly with the left mouse button.
1. Move the cursor to the desired channel screen on the
main monitor.
2. Click the recording type indicator with the left mouse
button and recording starts. Click it once again and the
instant record stops and the recording type indicator
will be changed into the scheduled recording mode
(Continuous / Alarm / Motion record). If the schedule is
not set, the recording type indicator turns white.
• You can instant record that the channels scheduled such as
alarm, motion or continuous.
• Once you stop instant recording, the recording type indicator
will be changed to the scheduled recording mode.
• You can not record the Instant and Continuous recording in
following conditions.
- A HDD is not attached.
-
A HDD is not formatted.
- The channel has no video input for display.
- Overwrite sets to "OFF" or "EVENT PARTITION", and normal
partition is full.
- On the HDD setting, the event partition is set to 100 %.
• You can not record the Alarm and Motion recording in
following conditions.
- A HDD is not attached.
-
A HDD is not formatted.
- The channel has no video input for display.
- Overwrite sets to "OFF" or "NORMAL PARTITION", and event
partition is full.
- On the HDD setting, the event partition is set to 0 %.
- The schedule (Alarm/Motion) record is not set.
• HDD partition according to a recording type.
- Normal Partition: It is the space in the HDD that stores the
continuous and instant recorded data. Once the normal
partition is set to 0% (the event partition is 100%), you can
not record the continuous or instant recordings.
- Event Partition: It is the space in the HDD that stores the
alarm and motion recorded data. Once the event partition
is set to 0%, you can not record the alarm and motion
recording.
• Priority of record.
Instant record > Alarm record > Motion record > Continuous
record.
Operation 43
4