Network Streaming; Ddns; Date/Time - LG LE5008 Series Owner's Manual

28 Installation

Network Streaming

3
• Ch: Displays the channel number.
• Resolution: Selects the recording resolution. Each group such as
"Ch1 to Ch8" and "Ch9 to Ch16" are set the same resolution.
• Quality: Selects the recording picture quality.
• Frame Rate: Selects the frame rate. The frame rate is the number
of transportable frames per second. According to resolution, the
frame rate is set automatically. If you wish to set manually, refer
to the below.
Resolution
352*240
NTSC 704*240
704*480
352*288
PAL 704*288
704*576

DDNS

This free service is very useful when combined with the LG DDNS
Server. It allows the user to connect the IP device using the URL,
rather than an IP Address. This also solves the problem of having a
dynamic IP address.
• DDNS Service: Marks up to activate the DDNS function.
Frame Rate
1, 3, 5, 7.5, 10, 15
1, 3, 5, 7.5
1, 3
1, 3, 5, 6, 7.5, 12.5
1, 3, 5, 6
1, 3
• Host Name: Enter the host name you want to use.
You can not use the "www", "mail", "http", "ftp", "com", "lg", "lge",
"lgddns", "lgeddns", "ddns" for host name.
• Registered Host: The registered host name appears.
• Update: Register the host name you typed in [Host Name] to LG
DDNS server.
How to register DDNS host name
With the DDNS function, you can easily use LG DVR.
When you use the DDNS function for the first time after you
purchased LG DVR
1. Displays the DVR setup menu.
2. Select [System] > [DDNS] option.
3. Marks up for the [DDNS Service] option.
4. Enter the host name in the [Host Name] option.
5. Press the [Update] button. If host registration is properly
completed, the host name will be displayed in the [Registered
Host] option. If the host name is not registered after updating,
please check network connection.
When you want to change DDNS host name
If you want to change the registered host name to new one, follow
as shown below.
1. Enter a new host name in the [Host Name] option.
2. Press the [Update] button. The confirmation window will be
displayed to change your host name.
3. Click the [OK] button. When host name is properly changed, the
changed host name will be displayed in the [Registered Host]
option. If host name is not changed after updating, please check
network connection.

Date/Time

• Date: Select the current year, month and day.
• Time: Select the current time.
• Date Format: Select the date display format.
• Time Format: Select the time display format.
• Time Zone: Select the time zone in the area where the DVR is
installed.
• Daylight Saving: Mark up when you use the daylight saving
function.
• Daylight Saving Start: Select the Daylight Saving start time.
• Daylight Saving End: Select the Daylight Saving end time.