Inserting Sheets and Covers (Sheet/Cover Insertion) (continued)
1.
Load insert/cover sheets into the desired tray, and load regular sheets
of the same size into copy paper tray source.
If different paper type is desired for covers, load them into the Multi-sheet bypass tray.
2.
Touch APPLICATION on the Basic Screen.
The Application Selection Screen will be displayed on the touch panel.
3.
Touch Sheet/Cover Insertion on the Application Selection Screen.
The Sheet/Cover Insertion Screen will be displayed.
9-4
If using thick or other paper for covers, load them into the Multi-sheet bypass
tray and touch BYPASS in step 4.
Be sure that the trays for copy paper, front/back covers, and insertions have
the same paper size loaded.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].