Positioning originals in Folded original mode
Folded original mode detects the folded original size without using the size detection
sensor of the RADF.
1.
Arrange originals in order.
2.
Position original(s) FACE UP in the document feeder tray.
Place two-sided originals with page one FACE UP.
Up to 50 originals can be set at a time.
3.
Adjust paper guides.
3-4
To use the Folded original mode, see procedure on p. 8-6 to p. 8-7.
• Before placing originals in the tray, be sure the document feeder is fully
closed. Once closed, do not open the document feeder, otherwise the
selected copy conditions may be altered automatically.
• Be sure not to use unsuitable RADF originals. See p. 10-7 for details.
Positioning Originals (continued)