Konica Minolta 7222 User Manual page 181

Lay Out Several Pages onto One Sheet (Combination)
3.
Select the desired Combination mode.
Touch 2 in 1, 4 in 1 or 8 in 1, and select a key in the LAYOUT area, referring to the
illustration on the following page.
4.
Touch OK.
The Application Selection Screen will be restored.
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
AMS is automatically selected, and tray 1 is selected. When selecting any other tray,
touch the desired tray key.
6.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
7.
Position originals FACE UP in the document feeder.
• For details on positioning originals, see p. 3-2 to p. 3-4.
• Use RADF store mode when the original count exceeds 50 (p. 3-26 to p. 3-
8.
Press [START].
When the finisher / inner / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
27).
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
Transparency
Image Insert
Book Copy
Upside Down
Non-Image
Area Erase
Reverse
Image
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
9-11