Konica Minolta 7222 User Manual page 193

Dividing an Image into Right and Left Pages (Book Copy) (continued)
6.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
APS and AMS are automatically released, and the STORE key appears highlighted to
show that the Store mode is automatically selected.
7.
Select the desired copy mode and magnification.
• When selecting Full scan mode and scanning from the platen glass, select
• APS and AMS are released and 1.00 magnification is selected
8.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
9.
Position original(s).
When using platen glass to scan, position the first page FACE DOWN with document
feeder or platen cover kept open.
When using document feeder, position original(s) FACE UP.
For details on scanning originals in Front cover + Full scan and Front/Back + Full scan
mode, see the description on the following page.
10.
Press [START] to scan.
11.
Repeat steps 9 and 10 for all originals.
When using platen glass, Non-Image Area Erase and AUTO Layout are
automatically selected.
12.
Touch STORE to exit the Store mode.
13.
Press [START].
The copier will start printing when ready for output.
When the finisher / inner / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
1-1 or 1-2 copy mode.
automatically. Change the magnification manually, if desired.
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
Transparency
Image Insert
Book Copy
Upside Down
Non-Image
Area Erase
Reverse
Image
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
9-23