Konica Minolta 7222 User Manual page 111

Making Fold in Copies (Fold / Fold & Stitch) (continued)
5.
Select additional copy conditions, as desired.
• 2-2 copy mode is also available. Simplex copy mode (1-1 or 2-1) cannot be
• To release the Booklet selection, touch APPLICATION on the Basic Screen
6.
Enter the desired print quantity from the control panel keypad.
• See p. 10-3 to be sure that the Saddle tray capacity is not exceeded.
• See p. 3-7 for details on setting print quantity.
7.
Position original(s).
When loading originals, heed the following limits on capacity:
Fold mode:
Fold & Stitch mode: 60 sheets or less (single-sided)
Exceeding the above capacity limits may cause trouble in the finisher.
See p. 3-2 to p. 3-6 for details on positioning originals.
8.
Press [START].
Press [STOP] to suspend the scanning or printing job.
When the Saddle tray capacity is exceeded due to the print quantity
selected, remove the copied sets as they exit; otherwise, mishandled
paper will occur.
selected.
to display the Application Selection Screen, then touch Booklet to deselect
it.
no limit
30 sheets or less (double-sided)
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold/
Fold&Stitch
Output with
Inner Tray
3-49