Front Fan Bracket - HP DL380 Generation 4 Maintenance And Service Manual

Remove the two screws and detach the front bezel.
3.
To replace the component, reverse the removal procedure.

Front fan bracket

To remove the component:
Power down the server (on page 20).
1.
Extend or remove the server from the rack
2.
the server from the
Remove the access panel
3.
Remove the front fan bracket.
4.
Remove all hot-plug fans from the front fan bracket
5.
To replace the front fan bracket, reverse the removal steps and press down on the top of each fan to be
sure it is seated properly.
("Extend the server from the
rack" on page 20).
("Access panel" on page 22).
rack" on page 19,
("Hot-plug fan" on page 49).
Removal and replacement procedures 25
"Remove