Pci Hot Plug Led Status Combinations - HP DL380 Generation 4 Maintenance And Service Manual

Online/activity LED
(green)
Flashing regularly
(1 Hz)
Flashing regularly
(1 Hz)
Flashing irregularly Amber, flashing
Flashing irregularly Off
Off
Off
Off

PCI Hot Plug LED status combinations

Power LED
(green)
On
On
Flashing
Off
Off
Fault/UID LED
(amber/blue)
Amber, flashing
regularly (1 Hz)
Off
regularly (1 Hz)
Steadily amber
Amber, flashing
regularly (1 Hz)
Off
Fault LED OK to
(amber) open?
Off No
On No
On or off No
On Yes
Off Yes
Interpretation
Do not remove the drive. Removing a drive may
terminate the current operation and cause data loss.
The drive is part of an array that is undergoing capacity
expansion or stripe migration, but a predictive failure alert has
been received for this drive. To minimize the risk of data loss, do
not replace the drive until the expansion or migration is
complete.
Do not remove the drive. Removing a drive may
terminate the current operation and cause data loss.
The drive is rebuilding, or it is part of an array that is undergoing
capacity expansion or stripe migration.
The drive is active, but a predictive failure alert has been
received for this drive. Replace the drive as soon as possible.
The drive is active, and it is operating normally.
A critical fault condition has been identified for this drive, and
the controller has placed it offline. Replace the drive as soon as
possible.
A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.
The drive is offline, a spare, or not configured as part of an
array.
Slot status
The power to the slot is on and the slot is functioning normally.
Do NOT open the slot release lever.
The power to the slot is on, but the slot needs attention for a
possible problem with the slot, board, or driver. DO NOT open
the slot release lever.
Examine the logs and HP SIM. If the expansion board is faulty,
remove or replace the board.
The power to the slot is being turned off or on, which may take
several seconds. DO NOT open the slot release lever.
To cancel the operation, press the PCI Hot Plug button.
The power to the slot is off, but the slot needs attention for a
possible problem with the slot, board, or driver.
The power to the slot is off.
Component identification 88