Align the PCI riser cage with the chassis and slide it into place.
1.
Tighten the thumbscrews to secure the PCI riser cage:
2.
Lift the thumbscrew knobs.
a.
Turn the thumbscrews clockwise while pressing down, until tightened.
b.
Turn the thumbscrews counterclockwise to lower the thumbscrew knobs.
c.
Front fan bracket
To remove the component:
Power down the server (on page 27).
1.
Extend or remove the server from the rack
2.
Remove the access panel
3.
("Extend the server from the
("Removing the access
panel" on page 29).
rack" on page 28).
Server operations 32