Hot-Plug Power Supply Calculations; Ddr2 Sdram Dimm Specifications; 1.44-Mb Diskette Drive Specifications - HP DL380 Generation 4 Maintenance And Service Manual

Generation 4 server
Table of Contents

Advertisement

Specification
Shipping
Storage
Maximum wet bulb temperature 28°C (82.4°F)
Relative humidity
(noncondensing)**
Operating
Non-operating
* All temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per 1,000 ft) to
3048 m (10,000 ft) is applicable. No direct sunlight allowed.
** Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for
storage corresponds to a pressure minimum of 70 KPa.

Hot-plug power supply calculations

For hot-plug power supply specifications and calculators to determine electrical and heat loading for the
server, refer to the HP Enterprise Configurator website (http://h30099.www3.hp.com/configurator/).

DDR2 SDRAM DIMM specifications

CAUTION: Be sure to install DIMMs in the proper configuration. Refer to the Documentation CD.
Item
Size
Width
Upgrade requirement *
*Use only 512-MB, 1-GB, or 2-GB, 72-bit wide, 1.8-V, PC2-3200 Registered ECC DDR2. Use HP DDR2 only.

1.44-MB diskette drive specifications

Specification
Dimensions
Height
Width
Depth
LEDs (front panel)
Read/write capacity per
diskette
High density
Low density
Drives supported
Drive height
Drive rotation
Transfer rate
Value
-30°C to 50°C (-22°F to 122°F)
-40°C to 70°C (-40°F to 158°F)
10% to 90%
5% to 95%
Description
512 MB, 1 GB, 2 GB
72 bits
Any combination of like-paired DDR2 DIMMs that provide
a minimum of 512 MB
Value
12.7 mm (0.5 in)
96 mm (3.8 in)
130 mm (5.1 in)
Green = On
1.44 MB
720 KB
1
One-third height
300 rpm
Specifications 95

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant dl380 g4

Table of Contents