NOTE: Cables are removed for clarity.
To replace the component, reverse the removal procedure.
Power button/LED board
To remove the component:
Power down the server (on page 20).
1.
Extend or remove the server from the rack
2.
the server from the
Remove the front bezel.
3.
Remove the access panel
4.
Remove the BBWC battery pack.
5.
NOTE: This feature applies only to SCSI models.
Remove the power button/LED board.
6.
To replace the component, reverse the removal procedure.
("Extend the server from the
rack" on page 20).
("Access
panel" on page 22).
rack" on page 19,
Removal and replacement procedures 37
"Remove