Pci Riser Cage; Expansion Board - HP DL380 Generation 4 Maintenance And Service Manual

PCI riser cage

To remove the component:
Power down the server (on page 20).
1.
Extend the server from the rack, if applicable
2.
Remove the access panel
3.
CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all
AC power cords before removing or installing the PCI riser cage.
Disconnect any internal or external cables connected to any existing expansion boards.
4.
Lift the PCI riser cage thumbscrews and turn them counter-clockwise.
5.
Remove the PCI riser cage.
6.
To replace the component, reverse the removal procedure.

Expansion board

To remove the component:
Power down the server (on page 20).
1.
Extend or remove the server from the rack
2.
the server from the
Remove the access panel
3.
CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all
AC power cords before removing or installing the PCI riser cage.
Disconnect any cables connecting the expansion board to the PCI riser cage.
4.
Remove the PCI riser cage.
5.
("Access panel" on page 22).
("Extend the server from the
rack" on page 20).
("Access panel" on page 22).
("Extend the server from the
Removal and replacement procedures 31
rack" on page 19).
rack" on page 19, "Remove