Jwac Host Information - D-Link xStack User Manual

xStack
To add another JWAC user account to the Switch, click the Add button, to clear all the existing entries, click the Clear All button.
To modify a JWAC user account, click the corresponding Modify button, which will open the following window:
The following fields can be configured:
Parameter
VID(1-4094)
Old Password
New Password
Confirm New
Password
Click Apply to implement changes made.

JWAC Host Information

The JWAC Host information Table allows the user to show or delete the hosts, which are handling or have been handled by the
switch.
To view the following window, click Security > JWAC > JWAC Host Information, as shown below:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 6 - 75 JWAC User Accounts window
Figure 6 - 76 JWAC User Account Modify Table window
Description
Enter the VLAN ID of the Account you wish to create.
Enter the original password of the user. This field is case-sensitive and must be a complete
alphanumeric string.
Enter a new password of the user. This field is case-sensitive and must be a complete
alphanumeric string.
Retype the new password entered in the previous field.
288