Wac Host Table Settings - D-Link xStack User Manual

xStack
The following parameters can be configured:
Parameter
User Name
Password
Confirmation
VLAN Name
VID(1-4094)
Click Apply to implement changes made.

WAC Host Table Settings

This window is used to enable and configure Web-based Access Control Host Table Settings on the Switch.
To view this window, click Security > Web Authentication > WAC Host Table Settings, as shown below:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 6 - 32 User Account Modify window
Description
Enter a user name for the new account.
Enter the password for the user. This field is case-sensitive and must be a complete
alphanumeric string.
Confirm the new password entered above. Entering a different password here from the one
set above will result in a fail message.
Enter a VLAN to be associated with the WAC account.
Enter the VLAN ID to be associated with the WAC account.
250