Stp Instance Settings - D-Link xStack User Manual

xStack

STP Instance Settings

The following window displays MSTIs currently set on the Switch.
To view this window, click L2 Features > Spanning Tree > STP Instance Settings, as shown below:
The following information is displayed:
Parameter
Instance Type
Instance Status
Instance Priority
Click Apply to implement changes made. Click the Modify button to change the priority of the MSTI. This will open the
Instance ID Settings window to configure.
Parameter
MSTI ID Displays the MSTI ID of the instance being Modified. An entry of 0 in this field denotes the CIST
(default MSTI).
The Type field in this window will be permanently set to Set Priority Only.
Type
Priority (0-61440) Enter the new priority in the Priority field
Click Apply to implement the new priority setting.
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 3 - 51 STP Instance Settings window
Description
Displays the instance type(s) currently configured on the Switch. Each instance type is
classified by a MSTI ID. CIST refers to the default MSTI configuration set on the Switch.
Displays the current status of the corresponding MSTI ID
Displays the priority of the corresponding MSTI ID. The lowest priority will be the root bridge.
Figure 3 - 52 Instance ID Settings window (modify)
Description
151