D-Link xStack User Manual page 270

xStack
NOTE: To set the Local Enable Password, see the next section, entitled Local Enable Password.
To view this window, click Security > Access Authentication Control > Enable Method Lists, as shown below:
To delete an Enable Method List defined by the user, click the
be deleted. To modify an Enable Method List, click on its hyperlinked Method List Name. To configure a Method List, click the
Add button.
Both actions will result in the same window to configure:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 6 - 45 Enable Method Lists window
Figure 6 - 46 Enable Method List - Edit window
Figure 6 - 47 Enable Method List - Add window
under the Delete heading corresponding to the entry desired to
259