Table of Contents
Advertisement
Tracking data and audio recordings are always deleted.
4. You can set the time for the Data Aging search under Server >
MultimediaDatabase > General in the Time of Data Aging search field.
The Data Aging search is performed once a day. If the MultimediaDatabase service
is unavailable at this time, the storage space of the images of the previous day,
that should be reduced, will not be reduced at a later point either.
Selecting virtual camera cropping
Note
The Image detail option is available to virtual cameras only.
1. Select the aspect ratio to be used for the virtual camera (4:3, 16:9 or
arbitrary).
2. To get a current camera image for configuration, click on Reload image.
3. Select an image detail for the virtual camera.
You can also move the image detail afterwards.
4. To change the position of the image detail, use the X and Y coordinates.
5. To change the size of the image detail, use the Width and Height values.
Important
The resolution selected in the Video settings dialog is used for the
display on the client as well as for the recording, see chapter Video
settings (multi-streaming disabled) (page 74).
Example:
The virtual camera image is about half the size of that of a 5
megapixel camera. The resolution of the virtual camera is
2.5 megapixels.
Because the resolution selected in the Video settings is 640x480,
the resolution for this virtual camera is scaled down automatically.
NVR Software - SeeTec Surveillance
73
Advertisement
Table of Contents
