Table of Contents
Advertisement
NVR Software - SeeTec Surveillance
Copying of alarm scenarios by using the camera configuration wizard
The camera configuration wizard allows you to copy alarm scenarios and adjust
single configuration options.
Only use the configuration wizard if you want to copy a large number of alarm
scenarios containing identical conditions but different cameras.
1. Click on Alarm scenarios.
2. Select the alarm scenario you want to copy.
3. Click on Customize.
The configuration wizard for copying an alarm scenario is opened.
You can go back to the previous configuration option at any time by using the Back
button.
4. In the Prefix for alarm scenarios field, enter a prefix for the copied alarm
scenario.
The name of the alarm scenario consists of the specified prefix and the camera
name that you will select during the next step.
5. Click on Next.
6. Select the cameras for which you want to create an alarm scenario.
For each selected camera, a separate alarm scenario will be created.
The following options are applied for the selected camera in the new alarm
scenario:
Trigger event (motion detection, manipulations (= tampering), SeeTec
Network I/O, etc.)
Alarm recording
Preset positions
Display on the client
E-mail delivery
7. Click on Next.
8. Select the user to be notified in case of an alarm.
9. Click on Next.
A summary of your configuration will be displayed.
10. Click on Finish to save the copied alarm scenario.
120
Advertisement
Table of Contents
