Table of Contents
Advertisement
6. Optional: Activate the Use authorization checkbox and enter the user
name and password for accessing the hardware component.
7. In the Host (IP address or name) field, enter the IP address or the host
name.
8. For distributed installations:
Select the CameraManagement server in the CameraManagement server
dropdown list.
9. For distributed installations:
Select the MultimediaDatabase in the MultimediaDatabase dropdown list.
10. Click on Wizard.
The camera wizard will be opened.
The following configuration options depend on the camera you want to configure.
You can display the camera in the browser and go back to the previous
configuration option at any time by using the buttons.
11. Under General, you can specify which data will be displayed in the camera
image.
12. Optional: Rotate the image and enable the digital inputs and outputs of the
camera.
13. Click on Next.
14. Optional: If you have enabled the digital inputs and outputs of the camera,
you can adapt the entries for the Name for CLOSED, Name for OPENED,
Icon, Dead time (s) and Hold time (s) fields of the inputs and outputs
during the following steps.
15. Click on Next.
16. Select the settings for the standard recording.
17. Click on Next.
18. Optional: Select the settings for the alarm recording, if they differ from the
standard recording.
19. Click on Next.
20. Optional: Enable the camera's motion detection and the desired number of
motion detection windows. Note that you have to configure the motion
detection windows directly on the camera. Specify the dead time.
The dead time is the time at which no other incoming signal is accepted after the
first incoming signal.
21. Click on Next.
A summary of your configuration will be displayed.
22. To create the new camera, click on Finish.
NVR Software - SeeTec Surveillance
63
Advertisement
Table of Contents
