Table of Contents
Advertisement
NVR Software - SeeTec client
1. To enable and configure joystick control, go to the Client configuration,
select the Input devices tab and in the device list, select the joystick that
you want to configure.
The right side of the dialog lists the joystick functions.
2. Select the option Device enabled.
3. Optional: Select the option Z axis enabled (hardware-dependent).
4. To assign a function to a joystick button, press the joystick button and select
the desired action from the dropdown list.
4.1.5
Changing profiles
1. In the File menu, select Change profile.
2. Select the desired profile and click on OK.
4.1.6
Changing users
1. In the File menu, select Change user.
2. Enter information for the new user.
3. Click on OK.
46
Note
You cannot change the profile in Configuration Mode.
In addition, there must be at least two existing profiles (user
and group profile) to be able to change the profile.
Note
You cannot change the user in Configuration Mode.
Advertisement
Table of Contents
