SUPERLOLUX NI525A User Manual page 40

NVR Software - Installation
The generated key pair is stored in the directory conf of the SeeTec Installation
(file: keystore).
For distributed installations, this file must be copied to the conf directory on all
SeeTec servers. Distribution to SeeTec server should take place via secured
communication paths.
If a firewall is used, then additionally, the ports 60011 and 60012 should be
activated. The key is transferred via these ports from the SeeTec server to the
SeeTec clients and to SeeTec server services. You can change these ports in SeeTec
Administration.
Configuration effort is not required for SeeTec clients. As soon as the keystore file
is available, an encrypted connection is set up automatically between SeeTec server
and SeeTec client.
3. To activate the encrypted communication, all SeeTec services must restart
on all participating SeeTec servers.
38
Note
Encrypted communication between SeeTec server and SeeTec client
is activated when the file keystore is saved in the conf directory of
the SeeTec installation.
To disable encrypted communication, delete this file and restart
SeeTec services.
®
Login via Windows
communication.
User name and password of SeeTec Administrator is requested
for SeeTec Administration for encrypted communication.
Encrypted communication between the camera and the SeeTec
server is also possible for many cameras. To this, take note of the
whitepaper for motion recognition/SSL configuration of the camera.
®
Active Directory is not possible for encrypted