NVR Software - SeeTec Surveillance
Timeout for prioritized PTZ actions
1. In Surveillance Mode, press F8 to enable prioritized camera control.
All cameras assigned to a user can only be controlled by that particular user. If no
control is performed, camera control is released after Timeout.
Prioritized camera control is only valid for those cameras that are currently
displayed. If you switch to another layer, prioritization of cameras that are no
longer shown is canceled. In addition, those cameras now shown are prioritized.
2. Press F9 to enable camera control before timeout.
Assigning layers / patrols
The Profile can be used to specify which layers will be available to the user or
group profile created and which patrols may be executed.
1. To do so, click on Edit and assign the respective layer or the respective
patrol.
Image settings
Video classifications
Video classifications are required only if Multi-streaming is enabled in Camera
configuration.
1. Select the video profile that will be used for display on the client. You can
use different frame rates and resolutions for the Normal, Selected and
Alarm modes.
If no profile is selected, the default profile is used automatically. The default profile
is selected in the Camera configuration.
Single frame (Motion JPEG / MxPEG streaming)
The option Single image (Motion JPEG, MxPEG) is used to specify the number of
frames per second that the client will display on each camera if the camera delivers
Motion JPEG images. There are three modes:
Normal
Selected
Alarm
108
Note
The user must be assigned the right to use prioritization in
Authorization Management.
(camera framed in gray)
(camera framed in green)
(camera framed in red)