Table of Contents
Advertisement
5.5.5
SeeTec ISearch
SeeTec ISearch can help you perform archive searches. If something occurred in
the field of vision of a camera, you may need a lot of time to search all archive
recordings manually.
Important
MOBOTIX cameras are supported only for Motion JPEG streaming.
Opening ISearch
1. Right-click on a camera image.
2. Select the SeeTec ISearch option.
Simple search
1. After opening SeeTec ISearch, enter your search parameters:
Any kind of motion
This search method searches for all changes in the image within the specified
time range. You can do this for the entire image or in an area that needs to
be defined.
A single event
This search method is very fast. It allows you to search image material of
several days within seconds. However, this method only works if a single
event with lasting changes occurred in the cameras field of vision.
2. Use the time bar and the From and To fields to specify the time range in
which to search for changes.
3. To select an area, click into the camera image and keep the left mouse
button pressed.
4. Right-click in the camera image to select the shape of the area.
You can set multiple areas.
5. Right-click in the camera image to delete existing areas.
6. Click on the Start search button to search the time range for changes.
The Results tab displays all search results.
You can export the results as individual images by selecting Export single
images.
If you highlight a search result and close SeeTec ISearch, the corresponding time of
the result is automatically displayed in Surveillance Mode.
NVR Software - SeeTec Surveillance
159
Advertisement
Table of Contents
